向绿而生 浙江桐庐钟山乡的“石...

石头凳子灯具 是这样创造的!

俄经济复苏、降低关税 拉动中国...

新闻中心
新闻中心| 展会讯息| 石材百科| 石材双译| 建材市场| 石材术语| 石材协会| 报刊书籍
您的位置:首页 > 行业资讯 > 新闻中心 > 行业标准 > 正文

高品质石材板材严把关

[ 发布日期:2008/1/30 9:50:28 ] 浏览人数: 3619

     近期,国家质检总局对天然花岗石、大理石建筑板材产品http://www.stonebuy.com/sample/质量进行了国家监督抽查,共抽查了北京、山东、广东、福建http://www.zongyi.com.cn/、上海等5个省、直辖市39家企业http://www.stonebuy.com/enterprise/的58种产品http://www.stonebuy.com/sample/,合格45种,产品http://www.stonebuy.com/sample/抽样合格率为77.6%。

     从抽查结果看,大部分生产企业http://www.stonebuy.com/enterprise/都能生产出符合国家推荐产品http://www.stonebuy.com/sample/标准中"合格品"以上质量等级要求的产品http://www.stonebuy.com/sample/,大、中型企业http://www.stonebuy.com/enterprise/生产的板材产品http://www.stonebuy.com/sample/质量较好。目前这些大、中型生产板材的企业http://www.stonebuy.com/enterprise/是我国大型、高档建筑物装饰材料的主要供货商,也是生产出口http://en.stonebuy.com/板材的主要企业http://www.stonebuy.com/enterprise/

     在连续4次的国家监督抽查中,山东冠鲁建材工业集团生产的产品http://www.stonebuy.com/sample/均表现出色。该集团的质量、成本、库存和各项基础管理工作在同行业中堪称楷模,与国际石材http://www.stonebuy.com/行业相比也并不逊色。集团每年都会推出更为有效的管理措施,例如"四把关、两禁止"就很见成效,"四把关"即工序、车间、公司、集团四级把关,"两禁止"即严禁不合格产品http://www.stonebuy.com/sample/流入下道工序,严禁不合格产品http://www.stonebuy.com/sample/进入市场http://www.stonebuy.com/enterprise/FuJian/QuanZhouShi.html。他们还推出了"检测工具加锤子"、"质检员轮岗制"等办法,加大了质量监控力度。集团除了给每位质检员配备全套检测工具外,还加了一把铁锤,准许他们砸碎不合格品,而损失全部由当事人赔偿。科学、严格的质量管理,管出了好的产品http://www.stonebuy.com/sample/质量。www.stonebuy.com

     一部分中小型生产企业http://www.stonebuy.com/enterprise/市场http://www.stonebuy.com/enterprise/FuJian/QuanZhouShi.html经销部的板材产品http://www.stonebuy.com/sample/质量较差。抽查中暴露出的主要问题是板材产品http://www.stonebuy.com/sample/的规格尺寸(长度、宽度和厚度)、外观质量及光泽度控制的不好,有的产品http://www.stonebuy.com/sample/超差严重,根本无法使用。

     在我国石材http://www.stonebuy.com/现行采用的天然建筑板材标准中,规定板材产品http://www.stonebuy.com/sample/的长度和宽度偏差不能有正值,而本次抽查中有9种板材产品http://www.stonebuy.com/sample/在长度、宽度尺寸上出现了正偏差,占抽查不合格企业http://www.stonebuy.com/enterprise/总数的82%。标准中还明确规定天然花岗石、大理石板材产品http://www.stonebuy.com/sample/的厚度偏差和对光泽度的要求,而抽查中有7种产品http://www.stonebuy.com/sample/的厚度不合格,占不合格产品http://www.stonebuy.com/sample/总数的64%;有6种产品http://www.stonebuy.com/sample/光泽度不合格,占不合格产品http://www.stonebuy.com/sample/总数的55%;有3种产品http://www.stonebuy.com/sample/外观质量不合格,占不合格产品http://www.stonebuy.com/sample/的27%。还有1种产品http://www.stonebuy.com/sample/存在放射性检测不合格。

     造成产品http://www.stonebuy.com/sample/质量不合格的主要原因是,部分企业http://www.stonebuy.com/enterprise/领导不重视产品http://www.stonebuy.com/sample/质量,产品http://www.stonebuy.com/sample/质量意识淡薄,有的企业http://www.stonebuy.com/enterprise/竟然没有生产标准,也没有配齐检测量具,没有配备专职的质量检验员,生产设备陈旧,生产工艺落后,工人的操作水平较低。绝大部分企业http://www.stonebuy.com/enterprise/使用的量具都没有经过国家法定部门计量检定。另外有的企业http://www.stonebuy.com/enterprise/为了降低产品http://www.stonebuy.com/sample/生产成本,减少生产工时或工序,使产品http://www.stonebuy.com/sample/质量大大降低。

评论区

 

手机访问